Film-FEP ±

Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low water absorption and good resistance to oils, greases, strong acids, and organic solvents. They also retain electrical properties, dielectric strength and dielectric constant in continuous operating temperatures from -100°F to 350°F (-73°C to 177°C).

Applications include transformer and capacitor wrapping, printed circuit board fabrication, splicing tapes, composite bonding protection, and low-cost masking.

Part #	Color	Adhesive System	Backing Thickness		Adhesive Thickness		Total Thickness		Adhesion Strength		Tensile Strength		Elong.	Temperature Range
Part #	Color	Adhesive System	mil	mm	mil	mm	mil	mm	oz/in	g/cm	lbs/in	kg/cm	%	Min °F	Max °F	Min °C	Max °C
FILM-Polyester
MCL050	Clear	proprietary	1	0.025	1.0	0.038	2.0	0.050	3	28	25	4.5	100	-100	400	-73	200
MCL075	Clear	proprietary	2	0.050	1.0	0.038	3.0	0.075	3	28	50	8.9	120	-100	400	-73	200
MCL150	Clear	proprietary	5	0.125	1.0	0.038	6.0	0.150	3	28	100	17.9	100	-100	400	-73	200
M50	White	S	1.0	0.025	1.5	0.038	2.5	0.064	25	276	25	4.5	100	-100	350	-73	177
M52	Clear	S	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-100	350	-73	177
M717	Red	S	1.0	0.025	2.8	0.071	3.8	0.097	30	331	25	4.5	100	-100	350	-73	177
M741	Blue	S	1.0	0.025	2.0	0.051	3.0	0.076	25	276	25	4.5	100	-100	350	-73	177
M746	Red/Bl	S	1.0	0.025	0.8	0.020	1.8	0.046	13	143	25	4.5	100	-100	350	-73	177
M751	Yellow	S	1.0	0.025	2.0	0.051	3.0	0.076	25	276	25	4.5	100	-100	350	-73	177
M758	Black	S	1.0	0.025	1.5	0.038	2.5	0.064	25	276	25	4.5	100	-100	350	-73	177
M803	Blue	S	1.0	0.025	2.0	0.051	3.0	0.076	25	276	25	4.5	100	-100	350	-73	177
M815	Clear	S	1.0	0.025	2.0	0.051	3.0	0.076	30	331	25	4.5	100	-100	350	-73	177
M823	Blue	S	1.0	0.025	1.8	0.046	2.8	0.071	30	331	25	4.5	100	-100	350	-73	177
M824	Blue	S	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-100	350	-73	177
M66/ M730	Green	S	1.5	0.038	1.0	0.025	2.5	0.064	25	276	35	6.3	100	-100	350	-73	177
M887	Emerald	S	2.0	0.051	1.5	0.038	3.5	0.089	40	441	50	8.9	120	-60	350	-51	177
M56	Clear	R	1.0	0.025	1.5	0.038	2.5	0.064	45	496	25	4.5	100	0	325	-18	163
M64	Yellow	R	1.0	0.025	1.5	0.038	2.5	0.064	50	551	25	4.5	100	0	325	-18	163
M734	Orange	R	1.0	0.025	0.6	0.015	1.6	0.041	6	66	25	4.5	100	0	325	-18	163
M788	Aqua	R	1.0	0.025	0.5	0.013	1.5	0.038	5	55	25	4.5	100	0	325	-18	163
M797	Mustard	R	1.0	0.025	2.0	0.051	3.0	0.076	30	331	25	4.5	100	0	325	-18	163
M851	Green	R	1.0	0.025	2.0	0.051	3.0	0.076	15	165	25	4.5	100	0	350	-18	177
M783	Pink	R	2.0	0.051	1.7	0.043	3.7	0.094	35	386	50	8.9	120	0	325	-18	163
M852	Green	R	2.0	0.051	2.0	0.051	4.0	0.102	15	165	50	8.9	120	0	350	-18	177
M855	Green	R	5.0	0.127	2.0	0.051	7.0	0.178	6	66	100	17.9	100	0	350	-18	177
M69	Clear	A/A	1.0	0.025	3.0	0.076	4.0	0.102	30	331	25	4.5	100	-20	325	-29	163
M37- 1HYL	Yellow	A	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-20	325	-29	163
M60	Clear	A	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-20	325	-29	163
M705	Black	A	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-20	325	-29	163
CW01	Natural	A	5	0.127	2	0.051	7	0.178	50	558	275	4.9	20	-4	311	-20	155

Film-Polyester +

Applications include transformer and capacitor wrapping, printed circuit board fabrication, splicing tapes, composite bonding protection, and low-cost masking.

CHR® Polyester Film Tape -- Products

Part #	Color	Adhesive System	Backing Thickness		Adhesive Thickness		Total Thickness		Adhesion Strength		Tensile Strength		Elong.	Temperature Range
Part #	Color	Adhesive System	mil	mm	mil	mm	mil	mm	oz/in	g/cm	lbs/in	kg/cm	%	Min °F	Max °F	Min °C	Max °C
FILM-Polyester
MCL050	Clear	proprietary	1	0.025	1.0	0.038	2.0	0.050	3	28	25	4.5	100	-100	400	-73	200
MCL075	Clear	proprietary	2	0.050	1.0	0.038	3.0	0.075	3	28	50	8.9	120	-100	400	-73	200
MCL150	Clear	proprietary	5	0.125	1.0	0.038	6.0	0.150	3	28	100	17.9	100	-100	400	-73	200
M50	White	S	1.0	0.025	1.5	0.038	2.5	0.064	25	276	25	4.5	100	-100	350	-73	177
M52	Clear	S	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-100	350	-73	177
M717	Red	S	1.0	0.025	2.8	0.071	3.8	0.097	30	331	25	4.5	100	-100	350	-73	177
M741	Blue	S	1.0	0.025	2.0	0.051	3.0	0.076	25	276	25	4.5	100	-100	350	-73	177
M746	Red/Bl	S	1.0	0.025	0.8	0.020	1.8	0.046	13	143	25	4.5	100	-100	350	-73	177
M751	Yellow	S	1.0	0.025	2.0	0.051	3.0	0.076	25	276	25	4.5	100	-100	350	-73	177
M758	Black	S	1.0	0.025	1.5	0.038	2.5	0.064	25	276	25	4.5	100	-100	350	-73	177
M803	Blue	S	1.0	0.025	2.0	0.051	3.0	0.076	25	276	25	4.5	100	-100	350	-73	177
M815	Clear	S	1.0	0.025	2.0	0.051	3.0	0.076	30	331	25	4.5	100	-100	350	-73	177
M823	Blue	S	1.0	0.025	1.8	0.046	2.8	0.071	30	331	25	4.5	100	-100	350	-73	177
M824	Blue	S	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-100	350	-73	177
M66/ M730	Green	S	1.5	0.038	1.0	0.025	2.5	0.064	25	276	35	6.3	100	-100	350	-73	177
M887	Emerald	S	2.0	0.051	1.5	0.038	3.5	0.089	40	441	50	8.9	120	-60	350	-51	177
M56	Clear	R	1.0	0.025	1.5	0.038	2.5	0.064	45	496	25	4.5	100	0	325	-18	163
M64	Yellow	R	1.0	0.025	1.5	0.038	2.5	0.064	50	551	25	4.5	100	0	325	-18	163
M734	Orange	R	1.0	0.025	0.6	0.015	1.6	0.041	6	66	25	4.5	100	0	325	-18	163
M788	Aqua	R	1.0	0.025	0.5	0.013	1.5	0.038	5	55	25	4.5	100	0	325	-18	163
M797	Mustard	R	1.0	0.025	2.0	0.051	3.0	0.076	30	331	25	4.5	100	0	325	-18	163
M851	Green	R	1.0	0.025	2.0	0.051	3.0	0.076	15	165	25	4.5	100	0	350	-18	177
M783	Pink	R	2.0	0.051	1.7	0.043	3.7	0.094	35	386	50	8.9	120	0	325	-18	163
M852	Green	R	2.0	0.051	2.0	0.051	4.0	0.102	15	165	50	8.9	120	0	350	-18	177
M855	Green	R	5.0	0.127	2.0	0.051	7.0	0.178	6	66	100	17.9	100	0	350	-18	177
M69	Clear	A/A	1.0	0.025	3.0	0.076	4.0	0.102	30	331	25	4.5	100	-20	325	-29	163
M37- 1HYL	Yellow	A	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-20	325	-29	163
M60	Clear	A	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-20	325	-29	163
M705	Black	A	1.0	0.025	1.5	0.038	2.5	0.064	30	331	25	4.5	100	-20	325	-29	163
CW01	Natural	A	5	0.127	2	0.051	7	0.178	50	558	275	4.9	20	-4	311	-20	155

Film-Polyimide +

Polyimide films are employed because of their extreme heat resistance. Service temperatures range from

-100°F to +500°F (-73°C to +260°C). These flame retardant films exhibit high tensile strength and conformability, good solvent resistance, excellent dielectric strength and good abrasion resistance.

Polyimide tape applications include electrical insulation, capacitor, transformer, and coil wrapping, electronic assembly, and wave solder protection.

CHR® Brand Polyimide Film Tape Products

Part #	Color	Adhes. Sys.	Backing Thickness		Adhesive Thickness		Total Thickness		Adhesion Strength		Tensile Strength		Elong.	Temperature Range
Part #	Color	Adhes. Sys.	mil	mm	mil	mm	mil	mm	oz/in	g/cm	lbs/in	kg/cm	%	Min °F	Max °F	Min °C	Max °C
FILM-Polyimide
KCL050	Amb	proprietary	1	0.025	1.0	0.025	2.0	0.05		28	30	5.4	50	-100	600	-73	315
2345-1	Amb	S	1.0	0.025	1.5	0.038	2.5	0.064	25	276	30	5.4	50	-100	500	-73	260
2345-2	Amb	S	2.0	0.051	1.5	0.038	3.5	0.089	25	276	50	8.9	75	-100	500	-73	260
2345-5	Amb	S	5.0	0.127	1.5	0.038	6.5	0.165	20	221	150	26.8	75	-100	500	-73	260
K104	Amb	S	0.5	0.013	1.0	0.025	1.5	0.038	15	165	10	1.8	25	-100	500	-73	260
K201	Amb	S	1.0	0.025	1.5	0.038	2.5	0.064	25	276	30	5.4	50	-100	500	-73	260
K202	Amb	S	2.0	0.051	1.5	0.038	3.5	0.089	25	276	50	8.9	75	-100	500	-73	260
K250	Amb	S	1.0	0.025	1.5	0.038	2.5	0.064	30	220	30	5.4	50	-100	500	-73	260
K350	Amb	S	2.0	0.051	1.5	0.038	3.5	0.089	20	220	50	8.9	75	-100	500	-73	260
K102	Amb	A	1.0	0.025	1.5	0.038	2.5	0.064	30	331	30	5.4	50	-20	350	-29	177
K109	Amb	A	2.0	0.051	1.5	0.038	3.5	0.089	30	331	50	8.9	75	-20	350	-29	177
K290- ESD	Amb	S	1.0	0.025	1.5	0.038	2.5	0.064	20	220	30	5.4	50	-100	500	-73	260
K100	Amb	S/S	1.0	0.025	3.5	0.089	4.5	0.114	20	220	30	5.4	50	-100	500	-73	260

Film-PTFE +

PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtually unaffected by all chemicals. At elevated temperatures, PTFE film still retains excellent tensile strength. Service temperatures range from -100°F to +500°F (-73°F to +260°C).

Film applications include high temperature coil and capacitor wrapping, composite bonding, masking, and conveyor release linings.

CHR® Brand PTFE Film Tape Products

Part #	Color	Adhes. Sys.	Backing Thickness		Adhesive Thickness		Total Thickness		Adhesion Strength		Tensile Strength		Elong.	Temperature Range
Part #	Color	Adhes. Sys.	mil	mm	mil	mm	mil	mm	oz/in	g/cm	lbs/in	kg/cm	%	Min °F	Max °F	Min °C	Max °C
FILM-PTFE
Skived
2045-2	Gray	S	2.0	0.051	1.5	0.038	3.5	0.089	30	331	15	2.7	325	-100	500	-73	260
2045-3	Gray	S	3.0	0.076	1.5	0.038	4.5	0.114	35	386	20	3.6	350	-100	500	-73	260
2045-5	Gray	S	5.0	0.127	1.5	0.038	6.5	0.165	40	441	30	5.4	400	-100	500	-73	260
2045-10	Gray	S	10.0	0.250	1.5	0.038	11.5	0.292	50	551	55	10.7	450	-100	500	-73	260
2042-2	Gray	A	2.0	0.051	1.5	0.038	3.5	0.089	25	276	15	2.7	300	-100	350	-73	177
2042-3	Gray	A	3.0	0.076	1.5	0.038	4.5	0.114	30	331	20	3.6	375	-100	350	-73	177
2042-5	Gray	A	5.0	0.127	1.5	0.038	6.5	0.165	35	386	30	5.4	400	-100	350	-73	177
2042-10	Gray	A	10.0	0.250	1.5	0.038	11.5	0.292	55	606	55	9.9	450	-100	350	-73	177
TV350	Wh	S	2.0	0.051	1.5	0.038	3.5	0.089	25	276	15	2.7	250	-100	500	-73	260
T	Wh	S	3.0	0.076	3.0	0.076	6.0	0.152	30	331	20	3.6	275	-100	500	-73	260
TV	Wh	S	5.0	0.127	1.5	0.038	6.5	0.165	35	386	30	5.4	275	-100	500	-73	260
TH	Wh	S	10.0	0.250	2.5	0.063	12.5	0.318	55	606	60	10.8	300	-100	500	-73	260
High-Modulus
2250-2	Gray	R	2.0	0.051	1.5	0.038	3.5	0.089	25	276	30	5.4	150	-80	325	-40	163
2253-2	Gray	A	2.0	0.051	1.5	0.038	3.5	0.089	30	331	30	5.4	150	-40	350	-40	177
2254-2	Gray	S	2.0	0.051	1.5	0.038	3.5	0.089	35	386	30	5.4	150	-40	500	-40	260
2255-2	Gray	S	2.0	0.051	1.5	0.038	3.5	0.089	30	331	30	5.4	150	-100	500	-73	260
2255-3	Gray	S	3.0	0.076	1.5	0.038	4.5	0.114	35	386	45	8.0	175	-100	500	-73	260
2255-5	Gray	S	5.0	0.125	1.5	0.038	6.5	0.165	40	441	60	10.7	175	-100	500	-73	260
2255-6	Gray	S	6.0	0.152	1.5	0.038	7.5	0.191	45	496	65	11.7	200	-100	500	-73	260
NOTE: 2255 product series also available with silicone adhesive in 4, 6, 7 and 10 mil backing thickness
HM350	Wh	S	2.0	0.051	1.5	0.038	3.5	0.089	25	276	25	4.5	150	-100	500	-73	260
HM426	Gray	S	2.0	0.064	1.5	0.038	3.5	0.089	25	276	25	4.5	150	-100	500	-73	260
HM430	Wh	A	2.0	0.064	1.5	0.038	3.5	0.089	25	276	25	4.5	150	-20	350	-29	177
HM650	Wh	S	5.0	0.127	1.5	0.038	6.5	0.165	30	331	45	8.0	200	-100	500	-73	260
Enhanced High Modulus
R233	Gray	A	5.0	0.125	1.5	0.038	6.5	0.165	30	331	75	13.0	150	-40	350	-40	177
R253	Gray	S	5.0	0.125	1.5	0.038	6.5	0.165	40	441	75	13.0	110	-100	500	-73	260
Extruded
2265-2	Clear	S	2.0	0.051	1.5	0.038	3.5	0.089	35	386	25	4.5	200	-100	500	-73	260
2265-5	Clear	S	5.0	0.127	2.0	0.051	7.0	0.178	45	496	65	11.8	250	-100	500	-73	260
2275-2	Rust	S	2.3	0.058	1.9	0.048	4.2	0.107	40	441	45	8.0	110	-100	500	-73	260
2283-2	Rust	A	2.0	0.051	2.0	0.051	4.0	0.102	30	331	30	5.0	150	-40	350	-40	177
2285-2	Rust	S	2.0	0.051	1.5	0.038	3.5	0.089	30	331	30	5.0	175	-100	500	-73	260
2285-5	Rust	S	5.0	0.127	1.5	0.038	6.5	0.165	40	441	75	13.0	200	-100	500	-73	260

Film-Rulon® +

Rulon® films offer superior abrasion resistance when compared to conventional PTFE films. Service temperatures range from -100°F to 500°F (-73°C to +260°C). In rotating bearing tests, it provided a 500-fold increase in wear resistance over standard PTFE.

Applications include bearing liners, chute and guide rail coverings.

Saint-Gobain CHR® Rulon® tapes combines a low coefficient of friction with the high temperature stability of PTFE. Rulon also offers outstanding abrasion resistance, which equates to a 500-fold increase in wear resistance over PTFE in rotating bearing tests. Rulon backing is chemically inert and offers excellent high temperature resistance. RU’s tape construction is stable, non-toxic and weather resistant. The film surface is self-lubricating and the backing is conformable. RU tape is supplied with a peel off release liner. With silicone adhesive Saint-Gobain CHR® Rulon tape will survive temperatures up to 280°C.

Static Coefficient of Friction = 0.05 - 0.1

Dynamic Coefficient of Friction = .12 - .15

Properties	Units (metric)	Values (metric)
CHR® RULON® TAPES
Specific gravity	n/a	2.22
Hardness	Shore D	60 - 75
Water absorption	%	0
Tensile strength	psi (MPa)	2,000 (13.8)
Elongation	%	175
Deformation under load 1,500 psi, 24 hr, RT	%	5.0
Izod impact strength	ft/lb/in (J/m)	6.0 (320)
Thermal conductivity	BTU•in/hr•Ft²•F°) (W/m•K)	2.3 (0.33)
Operating temperature range	°F (°C)	-400 to 550 (-240 to 288)
Flammability	in/min (m/s)	non-flammable
Maximum pressure (P)	psi (MPa)	1,000 (6.9)
Maximum velocity with no pressure (V)	ft/min (m/s)	400 (2)
Maximum PV	psi•ft/min (MPa•m/s)	10,000 (0.35)
Minimum mating surface hardness	RC	35

Film-UHMW +

UHMW polyolefin film tape provides anti-sticking and abrasion resistance properties for application temperatures ranging from -100°F to 225°F (-73°C to +107°C).

Applications include bearings, chute and guide rail coverings.

CHR® Brand UHMW Film Tape Products

Part #	Color	Adhes. Sys.	Backing Thickness		Adhesive Thickness		Total Thickness		Adhesion Strength		Tensile Strength		Elong.	Temperature Range
Part #	Color	Adhes. Sys.	mil	mm	mil	mm	mil	mm	oz/in	g/cm	lbs/in	kg/cm	%	Min °F	Max °F	Min °C	Max °C
FILM-UHMW
2300-5R	Nat	R	5.0	0.127	2.0	0.051	7.0	0.178	55	606	40	7.0	350	0	225	-18	107
2300-10R	Nat	R	10.0	0.250	2.0	0.051	12.0	0.305	55	606	80	14.5	400	0	225	-18	107
2302-3R	Nat	A	3.0	0.076	1.5	0.038	4.5	0.114	35	386	20	3.6	300	-40	225	-40	107
2302-5R	Nat	A	5.0	0.127	1.5	0.038	6.5	0.165	45	496	40	7.0	350	-40	225	-40	107
2302-10R	Nat	A	10.0	0.250	1.5	0.038	11.5	0.292	50	551	80	14.5	425	-40	225	-40	107
2302-20R	Nat	A	20.0	0.500	1.5	0.038	21.5	0.546	50	551	145	26.3	500	-40	225	-40	107
NOTE: For 23XX product series, a blue PE liner is standard.

CHR® FEP, Polyester, Polyimide, PTFE, Rulon®, UMHW, and Fluoropolymer film backed tape

Saint-Gobain Performance Plastics offers a broad range of PSA tapes serving industrial and commercial users. Produced from a variety of film, fabric, metal, laminations or paper substrates with acrylic, silicone, or natural rubber adhesive systems, Saint-Gobain is uniquely able to produce outstanding, and sometimes proprietary products.

Our combined expertise in fabrics, films, silicones and coatings gives you confidence in our team approach to providing solutions to critical applications.

Quick Links

Certifications

Terms & Conditions

- Procurement

- Sales

CRI Rugged

ELECTRO-MECHANICAL

DISTRIBUTION

since 1983

9001:2008
AS 9100 D

ISO

NIST
800-171

RSI, Inc.

An authorized distributor of electro-mechanical parts and services to global industries and markets such as; (DOD) Department of Defense, Energy Markets, Commercial Aerospace, Industrial Markets, and Transportation Industries. Contact Us