|
RUGGED SERVERS
We supply Mil-Spec, industrial-grade, customized, rugged servers to meet your most stringent operational requirements. Choose from our standard systems shown here with the options you want, or give us your dream server requirements, and we will design a 100% solution for you.
CRI uses the best of class industrial grade motherboards in its rugged servers. Most standard products use Supermicro motherboards and Intel CPUs
RS180i Rugged 1U Rack Mount Server - 20" deep
800 MHz FSB
Removalbe SCSI (1) or SATA (2) Drive Options
CD or RW/DVD
20" Depth, 24 lb
Mil Std Environments: thermal, shock, Vibe, EMI
RS189i Rugged 1U Rack Mount Server - 20" Deep New!
-
 1333/1066/677 MHz FSB - Up to two Dual-Core or Quad-Core Xeon Processors
- Up to 16 GB RAM
- Up to 9 2.5" SAS or SATA HDD
- 64-Bit Operating Systems
- Optical Drive Options RW-DVD, RW-CD, CD, DVD
- Mil-Spec Rugged
RS200i Rugged 2U rack mount server - 17" Deep 
- Supports Dual Xeon 3.2 GHz CPU
- Optional Removalbe Sony AIT drive
- Slimline DVD-RW Drive
- Memory Upgrade to 4 GB RAM
- Upgrade to 300 GB SCSI HDD
- Tested Mil-S-901D Grade A
RS280i Rugged 2U rack mount server w/RAID - 20" Deep 
- Single or Dual Xeon CPU up to 3.6 GHz Clock Speed
- Up to 12 GB RAM
- 1 to 4 x HDD (146 GB SCSI, IDE, or SATA)
- RW-DWD/CR-RW
- Sony AIT-3 Tape Backup Option
- Floppy Drive
RS253i Rugged 2U rack mount server - 15" deep New!
- Supermicro X7 series MB
- Up to Dual Dual Core or Dual Quad core Xeon CPUs
- Up to 48 GB RAM (MB dependent)
- Up to 3 x 2.5" front removable shock isolated SATA HDDs
- DVD-RW
- Flash Drive
- Programmable LCD
- Hour counter (front visable)
- Mil-Spec Rugged
RS286i Rugged 2U rack mount server - 20" deep New!
- 1333/1066/677 MHz FSB
- Up to two Dual-Core or Quad-Core Intel Xeon Processors
- Up to 16 GB RAM
- Up to 6 3.5" SATA Drives
- On board graphics
- On board LAN
- On board RAID
- MIL SPEC Rugged
RS290i Rugged 2U rack mount server - 15" Deep 
- 15" Depth ideal for short rack applications
- 800 MHz FSB
- one or two 3.6 GHz Xeon CPU
- up to 24 GB DDR266 RAM
- Dual SATA HDD (80 GB and higher)
- Slimline DVD-RW
- Floppy
- Approximately 16 lb. depending on configuration
- Custom high efficienty/high reliability power supply (DC and 400 Hz options)
- MIl-SPEC Rugged
RS300i Rugged 3U rack mount server - 20" deep 
- Mil-Std 901D Grade A
- Mil-Std 810F Shock and Vibe
- Mil-Std 461D EMI/EMC
- Up to 32 GB RAM (motherboard dependent)
- Up to dual dual core or dual quad core CPUs
- Up to 4 x shock isolated hard drives
- Shock isolated Slimline RW-CD or DVD
- Any ATX or Extended ATX motherboard providing desired expansion slots
- Dual redundant power supply option - AC or DC option
RS550i Rugged 6U Rugged Workstation 
- Any ATX or eATX MB
- Repackaging at the board level to Mil-Spec or near Mil Spec environments
- Commercial warranty passes to the owner intact
- Full commercial system performance, functionality, reliability, supportability
- Windows, LINUX, Solaris Operating System options
- HP/Compaq, Dell, SGI, SUN, IBM or Supermicro based solutions
- 7 x shock isolated 3.5" drive bays with option for Hot Swap Multiple Insertion StorCase receivers and frames
View Rugged Server Brochure pdf
|
